You should be redirected to the [Installation Guides](/installation-guides/) soon. Please [click here](/installation-guides/) if that doesn't happen.

featured-installation-guides

Learn how to install Di2 components and accessories using these simple installation guides. Install derailleurs, junctions, bike wiring, D-fly / Wireless modules and more. 

Building a Di2 bike isn't all that hard, but every little bit helps. Over the years I've written several posts on Di2 bike building as well as little tips, tricks and installation guides. If you're missing anything however, [just send me a message](/contact/).

## Di2 Components
Whether you're building a road bike, MTB, gravel bike or tandem doesn't really matter - they all require the same base components: a battery, electric wires, and a derailleur. If you're building an 11-speed Di2 bike, you'll also need a Junction A, and probably a Junction B as well. 

There is a full overview of all [Di2 Road / MTB / Gravel Components](/components-and-accessories/) on the site, as well as a [list of E-bike / Urban Di2 Components](/components-and-accessories/e-bike/). 

The most commonly used components are:

- [EW-SD50 Electric Wire](/component/di2-electric-wire-ew-sd50/) - for 10-speed and 11-speed Di2
- [EW-SD300 Electric Wire](/component/di2-electric-wire-ew-sd300/) - for EP8 series Di2, and 12-speed Di2
- [BT-DN110 Internal Battery (11-speed Di2)](/component/internal-battery-bt-dn110/) / [BT-DN300 (12-speed Di2)](/component/internal-battery-bt-dn300/)
- Junction A, for 11-speed Di2 only: [EW-RS910 handlebar / frame](/component/frame-handlebar-junction-a-ew-rs910/) or [SM-EW90-A below-the-stem](/component/below-the-stem-junction-a-sm-ew90/)
- [10/11-speed Di2 SM-BCR2 Battery Charger](/component/internal-battery-charger-sm-bcr2/)
- [12-speed Di2 charging cable](/component/ew-ec300-rear-derailleur-internal-battery-charging-cable/)

For a list of all known Di2 Components, have a look at the [component overview page](/components-and-accessories/).

## Installing components on your bike
To help you choose and install your Di2 parts I've written these pages:

- [11-Speed Di2: Select your Di2 components - What parts do you need?](/building-a-di2-bike-what-parts-do-you-need/)
- [11-Speed Di2: How to determine Di2 wire lengths for your bike](/building-a-di2-bike-cable-routing-lengths-and-wiring/)
- [Di2 Installation Guides](/installation-guides/)
- [Where to find Shimano documentation](/learn-how-to-use-the-shimano-documentation/) (dealer manuals, specs, exploded views)
- [Di2 Compatibility Guide - mix different series on the same bike](/di2-compatibility-mix-ultegra-dura-ace-xtr-xt-and-grx-components/)

## Other pages
Although not directly related to building your own bike, these pages are good to read.

- [Build log: Cinelli Veltrix Disc](/build-log-cinelli-veltrix-disc-di2/) - R8050 Di2 with FC-R9100-P Power Meter
- [Wireless / BluetoothLE // ANT Troubleshooting guide](/di2-wireless-module-bluetoothle-ant-troubleshooting-guide/)
- [Update your Di2 Firmware](/learn-how-to-update-your-di2-component-firmware/)
- [Di2 Software and Tools](/di2-e-tube-software-and-downloads/)
- [In-depth guide on upgrading your old Di2 bike](/in-depth-guide-on-upgrading-your-old-di2-bike/)

thumbnail_di2-bike-building-featured.jpg

di2-bike-building-featured.jpg

large_bike-building-hub.png

medium_bike-building-hub.png

small_bike-building-hub.png

thumbnail_bike-building-hub.png

bike-building-hub.png

If you're building a new Di2 bike these pages will come in handy. The Di2 Bike Building hub page lists everything even remotely relevant to building a Di2 bike.